Shim & Allen key for Sette

Shim kit with Allen keys for adjusting the hook cylinder and calibration of the Sette.

How to: Cone Burr Shim Installation

*** Unplug the grinder from power supply ***

1. Close the hopper gate and clear ground coffee from the system
2. Rotate the macro adjustment assembly in the coarse direction, past 31 until it stops and can be pulled down for removal.
3. Place the assembly on a work surface. Press down evenly on the metal adjustment assembly to remove the cone burr subassembly.
4. On separation, the adjustment subassembly will snap free.
5. Pull to remove the nozzle.
6. Remove the cone burr hex bolt.
7. Remove the cone burr.
8. Add 1 shim.
9. Install the cone burr.
10. Note that the burr and holder are keyed.
11. Install the cone burr hex bolt and tighten.
12. Install the nozzle.
13. Place the cone burr subassembly upside down on the work surface. Position the adjustment ring and press down evenly to snap the parts together into one assembly.
14. The parts will make an audible snap sound.
15. Insert the cone burr holder halfway up into the grinder. Rotate the assembly as needed until the cone burr holder is keyed into the unit.
16. Line up the blue tab on the adjustment ring with the blue arrow on the case.
17. Press up on the assembly and rotate the blue tab towards the rear of the grinder.
18. Install the hopper and return the unit to operation.